The basic models concentrate entirely on optimising the flue gas system and thus ensure even combustion. This results in energy and emission reductions.
By using stainless steel or aluminised steel and implementing a simple mechanism without stop dampers, these models are kept attractively priced and fulfil their basic function without restriction.
However, the positive pressure damper as a safety device against pressure peaks must be dispensed with in these models.
The draught regulator 05-E
Draught regulator 05-E made of stainless steel (05-E) suitable for installation in the chimney flank. Air group 5 according to DIN 4795.
The Z100
Z 100, ZA 100 draught regulator completely made of stainless steel, in version ZA 100/100 or ZA 100/110 incl. connection piece suitable for installation on the NW 100 or 110 flue pipe.
The draught regulators 012/012 RaRo/012 RaRo E
012
- Self-acting secondary air appliance for direct installation on the connecting piece (flue gas pipe).
- High control accuracy due to knife bearings.
- Air group 1-4 according to DIN 4795.
- Code number E design in stainless steel.
012 RaRo or 012 RaRo E
- Self-acting secondary-air appliance with connecting piece and casing sleeve for installation on the connecting piece (flue gas pipe).
- Round version Ø150mm.
- Due to cover segments suitable for all pipes from 100-180mm.
- Can also be used for rising and vertical pipes.
012 MU
Self-acting secondary-air appliance with wall lining for installation in the chimney flank.