EW-Alkon – metal-sealing, single-walled stainless steel flue gas system, the innovative all-rounder
EW-Alkon is a universally applicable, single-walled flue gas system for connecting lines and space-saving shaft installation. The connection technology with metallic surface seal combines the quality of welded systems with the advantages of light and fast element construction.
The conical plug connection with the ideal taper angle of 2° ensures a pressure-tight connection and at the same time has a high self-locking effect against loosening. The metallic sealing principle without elastomer seals is consistently implemented right down to the cleaning caps and is patented throughout Europe.
Therefore, EW-Alkon can be used over the entire temperature range from condensing operation up to 600 °C continuous operation in both negative pressure and positive pressure up to 5000 Pa.
This suitability for all types of fireplaces, including CHP units, emergency power systems, fuel cells, engine systems, allows the heat generator to be converted at a later date or flue gas heat exchangers to be retrofitted, thus saving investment costs.
A wide variety of fireplaces can be connected, whether chimney or tiled stoves, boilers for oil, gas, wood, wood pellets or condensing boilers for oil or gas. The metallic sealing principle means wear-free operation, minimizes maintenance costs and increases the operational reliability of the heating system.
As a WPG design in material 1.4539 for wood logs, wood pellets and wood chips, the EW-Alkon system is approved for humid operation after any soot fire.
EW-Alkon at a glance
Certification | DOP-No. 0432-CPR-00117-11/111 |
T200 P1 WO | up to 200 °C flue gas temperature, overpressure 200 Pa, humid operation oil/gas |
T400 N1 WO/DG | up to 400 °C flue gas temperature, negative pressure, humid operation oil/gas, dry operation, soot fire resistant, oil/gas/solid fuels |
T600 H1 WO | up to 600 °C flue gas temperature, overpressure 5000 Pa, humid operation, oil/gas |
T600 H1 DG | up to 600 °C flue gas temperature, overpressure 5000 Pa, dry operation, soot fire resistant, oil/gas/solid fuels |
T600 H1 WG | up to 600 °C flue gas temperature, overpressure 5000 Pa, humid operation, soot fire resistant, oil/gas/solid fuels |
Material and designs
- High quality stainless steel 1.4404
- High-gloss surface, low contamination
- WPG 1.4539, high temperature material 1.4828 on request
- Material thickness 0.6 and 1.0 mm
- Inside diameter 80 – 600 mm round, oval as special design
- Tubes TIG/laser butt welded
- Moulded parts drawn or welded and passivated using the high-pressure pressing process
- Flexible connection technology: Functional and can be shortened on site. Easily adaptable to difficult conditions due to component diversity and ready for immediate use.
- Delivery forms: Round cross-section as standard, also available as oval version for confined spaces.
- High-quality materials: In addition to state-of-the-art production methods, decisive for the longevity of the system and high corrosion resistance.
- High quality: CE declaration of performance with voluntary external monitoring according to System 2+. Certified production according to DIN EN ISO 9001.
- Fireplaces for oil, gas, solid fuels, wood, wood chips, wood pellets
- Low temperature and condensing boilers
- Flue gas temperatures up to 600 °C, soot fire resistant
- Installation with or without heat insulation
- Dry and humid (FU) operation mode
- Negative pressure or positive pressure up to 200 Pa with seal
- Single and multiple assignment, connection pipes
- Room air dependent or room air independent in the shaft (LAS)
- Cross-section reduction of existing installations