For maximum accuracy and safety
These draught regulators are characterised by the highest control and manufacturing accuracy. Thanks to the exclusive use of stainless steel, high-quality brass and elaborate design solutions such as the stop damper, these flaps operate extremely quiet and reliably.
The Z 130, Z 180 and Z 150 S models can be extended or retrofitted with a motor control unit to enable ventilation of the chimney during downtimes. In contrast to the basic models, these draught regulators are also available with an overpressure flap. This safety device protects against unintentional pressure surges, as can occur when the boiler is started up.
The Z 150/ZUK 150
precision draught regulators STANDARD Z-150, ZUK 150 series
Draught regulator completely made of stainless steel, optionally for chimney mounting with the KW pipe bushing and flue pipe mounting with the KW connection piece.
The Z 130/Z 180
Precision draught regulator type series UNIVERSAL Z 130, ZUK 130, Z 180 and ZUK 180
Draught regulator with motor control (retrofittable) for combined secondary-air appliance.
Control wheel and housing completely made of stainless steel, brass adjustment weights, external self-cleaning bearings, with locking option in the closed position, for chimney installation with the KW pipe bushing or flue gas pipe installation with the KW connection piece.
Model series ZUK with fixed positive pressure damper.
KW motor control
Accessories KW motor control for combined secondary-air appliance (can also be retrofitted).
- Actuator including drive mounting 230V with return spring, limit switch, built-in fuse, adjusting lever for manual operation and locking.
- Model series M130/180 S1 KS, M 150 S1 KS for chimney ventilation during the entire operating pauses of the fireplaces with connection cable 4m as well as plug and socket part, suitable for forced draught burners with Euronorm plug.
- Model series M 130/180 and M 250 without connection cable (on-site).